Why mAh alone doesn’t tell the whole story
Why mAh alone doesn’t tell the whole story
Blog Article
One of the first things people look for when buying a power bank is its battery capacity, usually indicated in milliampere-hours (mAh).
So power banks can be sold as 10,000mAh, 20,000mAh, 30,000mAh or even higher. Of course, many buyers think that a power bank with a higher mAh rating will always have more energy stored and will provide more backup time.
However, this may not always be the case.
mAh is a useful battery spec but it doesn’t tell you all you need to know about a power bank. You also need to factor in voltage, conversion efficiency, power output, quality of the battery and other factors to know its true energy capacity.
For example, a 20,000mAh power bank does not necessarily have more energy than all 15,000mAh power banks. Equally important is the voltage rating of those capacities.
This is even more important if you’re buying a laptop power bank, as laptops usually need more energy and more output power than smartphones.
In this article, we’ll explain why mAh alone doesn’t tell the whole story and what other specs you should check out before choosing a power bank.
1. mAh Measures Electric Charge Not Total Energy
First of all we need to know what is measured in mAh.
mAh means milliampere-hour. This is a measure of how much electrical charge a battery can deliver over time.
For example, a 20,000mAh battery has an electric charge capacity of 20,000 milliampere-hours at its specified voltage and testing conditions.
But this number does not tell you directly how much energy the battery stores.
Why ? ?
And voltage is important, too.
The energy stored by a battery is determined by both its electric charge capacity and its voltage. So two batteries with the same mAh rating can have different energy capacity if they have different voltages.
To compare how much energy they actually store, you need to look at watt-hours (Wh).
2. Voltage Difference Makes Two Power Banks With Same mAh Rating Very Distinct
Suppose you have two power banks:
- Power Bank A: 3.7V 20000mAh.
- Power Bank B: 7.4V 20,000mAh
They have the same mAh rating but different energy capacities.
Let's find out their energy capacities.
Power Bank A:
20,000 x 3.7 / 1000 = 74 Wh
Power Bank B:
20,000 x 7.4 / 1000 = 148 Wh
As you can see, Power Bank B contains 2 times more energy than Power Bank A with the same 20,000mAh advertized capacity.
That’s why comparing power banks by mAh alone can be tricky.
Wh is a more meaningful comparison if you want to know how much energy a battery actually stores.
3. Wh Gives You a Better Picture of Real Battery Capacity
Wh means watt-hour. It is a measure of power.
Wh is not like mAh , which is a measure of electric charge . Wh takes voltage and charge capacity into account .
The formula reads:
Wh = mAh * V / 1000
For example, a 20,000mAh power bank with a nominal battery voltage of 3.7V has:
20,000 x 3.7 / 1000 = 74Wh
The 74Wh power bank stores less energy than the 100Wh power bank.
That’s why Wh is especially useful when comparing laptop power banks or batteries with different voltage ratings.
If you have two power banks under the same rating, same voltage, then looking at the mAh figures can be useful. But generally if the voltages are different Wh is the better measurement.
4. You cannot use all the advertized best laptop power bank energy due to conversion losses.
The other reason mAh doesn’t tell the whole story is that the energy stored within a power bank isn’t necessarily what’s delivered to your device.
Inside the power banks are battery cells that hold energy at a specific voltage.
But your phone or laptop might require a different voltage. The electronic circuit in the power bank will have to change the battery voltage to the output voltage.
This conversion process is not 100% efficient .
Some energy is lost via:
- Heat lost while changing voltage.
- Resistance of internal parts to electricity.
- Operation of power management circuit.
- Losses in the cable and connections.
Let's use a simple example.
Assume a power bank rated at 100Wh energy capacity and with assumed conversion efficiency of 85%.
100 x 85 / 100 = 85Wh
Therefore, under the assumed conditions, about 85 Wh can reach the output.
The remaining energy is wasted during conversion and delivery.
That’s why you don’t want to expect a 100Wh power bank to give exactly 100Wh to a connected laptop.
The efficiency is dependent on the power bank, output voltage, load, temperature and operating conditions.
5. Thus, higher mAh rating does not mean longer backup time.
Most people assume that buying a power bank with a higher mAh will result in a longer backup time.
But battery backup time is not only a function of the battery's mAh rating.
It depends also on:
- Voltage and capacity of the battery in Wh.
- The power consumption of the appliance associated.
- Efficiency of conversion.
- Power bank output capabilities.
- The amount of work being done.
For example, suppose you have two laptops, both being charged from two power banks, both containing the same amount of stored energy.
Laptop A uses an average of 25W and Laptop B uses an average of 50W.
With the same amount of usable energy, Laptop A will typically last about twice as long.
That’s because it uses energy at a lower rate.
The capacity of a power bank tells you how much energy it can hold . The power consumption of a laptop tells you how fast it uses that energy .
6. Battery Capacity vs. Output Wattage
Another important spec that people often overlook is output wattage.
Even if the power bank has a very large battery capacity, it may not be suitable for a particular laptop if it is not able to provide sufficient power.
Let’s say you have two power banks:
Specification Power Bank A Power Bank B
Battery capacity 100Wh 150Wh
Max output 30W 100W
Power Bank B has more energy and can deliver more power at a time.
However, Power Bank A may not be able to output enough power to properly charge your laptop if it requires 65W for USB-C charging.
In terms of output, Power Bank B is the better choice (assuming it can supply the voltage and protocol that the laptop needs).
This is the reason why battery capacity and output wattage should not be confused.
- Capacity (Wh) – The amount of energy the power bank can store.
Output power (W): The power it can deliver at a given time.
Both the specifications are important while selecting a laptop power bank.
7. Battery Quality Also Influences Real World Performance
Two power banks can have the same advertized capacity, but the quality of the internal battery cells can make for very different performance.
The battery cells are the components that store and release energy.
The quality of these cells may influence:
- Battery's ability to deliver its rated capacity.
- How well it holds its capacity over time.
- How much heat it produces when it’s on.
- Its charge and discharge cycles.
- How long it has served in total.
Low quality cells or cells that are falsely rated may not perform as advertised.
For instance, a 30,000mAh power bank may not give the same performance as another 30,000mAh power bank with the correct rating.
That’s why it’s important to consider the manufacturer’s credibility, battery specs, protection features, and product quality rather than the capacity number alone.
8. Battery Age Can Limit the Capacity You Actually Receive
The advertized capacity of a power bank is usually the rated capacity of the battery when new and tested under certain conditions.
But lithium batteries degrade over time and slowly lose their ability to store energy.
This is called battery degradation.
Over time, a battery will lose its ability to store energy due to factors such as repeated charging cycles, heat, high charging voltage and long-term storage.
Say we have a power bank that used to be rated at 100Wh.
After some years of use, the rest of the capacity might shrink to 80Wh.
The label may still read 100Wh, but the battery might not contain the same amount of energy it did when it was new.
That’s why good battery quality, thermal management and good usage practices are important.
A good power bank must have not only a useful capacity when new, but must also retain a reasonable amount of capacity over time.
9. Why the mAh in your ad might not be the output capacity
Have you ever noticed that some power banks boast a big mAh rating but give a smaller capacity figure in the output specifications?
This may be because the internal battery capacity and output capacity are measured at different voltages.
Lets take a power bank with rating:
20,000 mAh
- Battery voltage nominal 3.7V.
Its capacity of internal energy is:
20000 * 3.7 / 1000 = 74Wh
Or we can write the same theoretical energy at 5V as:
74 x 1000 / 5 = 14,800 mAh
So the same 74Wh of energy is equivalent to:
- 20,000mAh @ 3.7V.
- 14,800mAh @ 5V
The difference doesn't necessarily mean the manufacturer has stripped some of the battery capacity.
This is because mAh depends on voltage.
In practice, the available energy at the output will be further reduced by conversion losses.
This is an important detail to know when reading power bank labels and comparing advertized capacity to output specs.
10. Why This Is Even More Important When Buying A Laptop Power Bank
If you own a smartphone, you might want to start by comparing the mAh rating of power banks with similar battery designs.
But regarding laptop power banks, looking at mAh alone can be especially misleading.
Laptop power banks usually have bigger capacities and may use different internal battery configurations.
For example, here are two power banks:
Specification Power Bank A Power Bank B
Capacity 20,000mAh 25,000mAh
Battery voltage 3.7V 3.7V
Energy capacity 74Wh 92.5Wh
Here, Power Bank B has a greater storage capacity.
But the comparison could be different, if the internal battery voltages were different.
When choosing a laptop power bank, ensure:
1. Wh rating: To know how much energy the battery stores.
2. Output wattage: To make sure it can put out enough power for your laptop.
3. Output voltage: To check if it will work with your laptop's charging requirements.
4. Battery cell quality: To test reliability and long term performance.
5. Usable Capacity: To know how much energy can actually reach your laptop.
6. Protection Features: Protects the battery and connected devices.
These specs will give you a much better idea than mAh alone.
11. How to Choose a Power Bank Without Getting Fooled by Capacity Numbers
Before you buy a power bank, take a moment and look at its specifications.
Here are some practical things to think about.
Look at the Wh rating.
If the manufacturer gives you both mAh and Wh ratings, use the Wh rating to compare stored energy between different batteries.
Check voltage at battery
Where only mAh is given, check the nominal battery voltage. You need both figures to compute the energy capacity .
Check the Wattage Output
Ensure that the power bank can supply enough power to your device. A large battery is not the same as high output power.
Check the real product specifications
Do not depend solely on large numbers shown in ads. Look for specific information on battery capacity, voltage, output power and charging compatibility.
Consider battery quality.
As a rule of thumb, it is better to buy a power bank with good quality, properly rated battery cells, rather than just go for the one with big numbers but unclear specs.
Know usable space
Remember that because of conversion losses, the energy available to your device will be less than the energy stored in the battery.
Frequently asked Qs
1. Does a higher mAh rating make for a better power bank?
Nope. mAh more does not necessarily mean that a power bank saves more energy. You also need to think about the battery voltage. Wh is a more useful comparison of energy capacity.
2. Why Wh is more important than mAh?
Wh measures stored energy and mAh measures electric charge. Wh is usually more useful when comparing batteries of different voltages, because the voltage affects how much energy a given amount of charge represents.
3. Can two 20,000mAh power banks be different capacities?
Yes. If they are not rated at the same nominal battery voltage, they may store different amounts of energy and have different Wh ratings .
4. Does a 30,000mAh power bank last longer than a 20,000mAh power bank?
Not necessarily. It is determined by their battery voltages and usable energy and the power consumption of the device connected to it. 30,000mAh one will generally have more energy . If they are the same voltage and similar efficiency .
5. Why is the capacity of my power bank lower than what is on the box?
The advertized capacity is usually the rated capacity of the internal battery. Power and voltage conversion wastes some energy. This will therefore generally mean a lower output capacity.
6. What does 100Wh mean in a laptop power bank?
This means the battery has a rated energy capacity of 100 watt hours. This doesn't mean every laptop will get exactly 100Wh as there are conversion losses in the power delivery.
7. Should I look at mAh or Wh when purchasing a laptop power bank?
Check Wh first as it gives a better picture of stored energy. Also, check the output wattage, charging voltage, battery quality and compatibility with your laptop.
8. Can a power bank have high mAh but low watt output?
Yes . Battery capacity and output wattage are two different specifications. A power bank can have a high capacity of energy storage and a relatively low maximum output.
Summary Power Bank Capacity – Elvis Tech Tips
The higher the mAh, the more impressive the power bank may seem, but that's not the only aspect.
Before you decide on a power bank, remember:
mAh is a unit of electric charge, not total energy.
- Voltage is an indicator of the energy capacity of a battery.
- Wh makes it easier to compare the energy capacity of batteries.
- Conversion losses reduce the energy available to the connected devices.
- Wattage of output : It is the total power a power bank can give.
- Real-world performance can be affected by battery quality and age.
- Usable capacity may differ from advertized battery capacity.
At Elvis Tech, we believe that customers should know the specs of the products they buy. Accurate Wh capacity information and the use of original lithium battery cells in our laptop power banks are appreciated.
When choosing a laptop power bank, don't judge it based on mAh alone. Check out the full specifications to see how much energy it can store, how much power it can deliver and whether it will suit your laptop's needs.
A good power bank is not only about the number of capacity. It’s one you can trust to work reliably and provide the backup power you expect.
Report this page